Rhin-O-Tuff HD7700 Ultima Heavy Duty Electric Punch and Accessories
- Patented auto-reverse to prevent overload jams
- 55-Sheet punching capacity
- 14" binding edge with open-end for longer documents
- Disengageable dies to punch for wire, coil, comb, 3-ring, and more (sold separately)
- Ships Free Over $75
- The Patented Auto Reverse Feature triggers an auto reversing function to reduce jamming in the punch when an overload detected.
- 14" (356mm) open ended extra capacity die.
- U-View waste tray holds up to 150% more waste than any other tabletop punch and eliminates troublesome overfills.
- New Diagnostic Display Lights give indications of important machine conditions.
- Rated up to 55 sheets or 110 pages of 20 pound (80gsm) paper. The number of sheets depends on the paper weight and punch pattern used.
- An automatic and manual reverse feature which provides extra insurance to reduce costly downtime & expensive service calls due to overload jams.
- 25 cycles per minute.
- Punch up to 5 plastic Mylar sheets regardless of hole pattern (depending on Mylar mil thickness).
- Patented "QCDS", Quick Change Die System.
- All punch pins easily disengage.
- "Accu-Set" paper adjustment knob for fine adjustments on odd paper sizes.
- Smooth, Quiet, Power on Demand Operation.
- Choose the Standard Foot Pedal and Palm Switch or the optional Versa Switch.
- The HD7700 has more than 20 interchangeable dies available with 12 standard hole patterns. Including: Comb, Wire-O® Twin Loop, Plastic Coil, GBC VeloBind, and 3 Hole Loose Leaf. (Each die is priced separately).
- Extremely durable all metal construction.
- Extra high capacity Waste Chip Tray with Clear View Access. No sensors needed.
- CE approvals.
- 3 Year Manufacturer's Warranty.
- Punching Method: Electric
- Punching Format: Vertical
- Max Punch Capacity: 55 Sheets of 20 lb. paper
- Max Binding Edge: 14"
- Disengageable Dies: Yes
- Compatible Accessories: HD7700 Dies
- Operation: Foot Pedal or Palm Switch
- Dimensions: 21" W x 22.5" D x 8.5" H
- Shipping Weight: 103 lbs.(46.3 kgs)
Welcome to MyBinding video. This is the demo and assembly of the Onyx HD7700. This heavy duty tabletop punch is the top of the line punch solution for all your binding needs. Before we get to the assembly, let's watch a demonstration to see just how this machine works. First you'll need to set the paper stop according to your project's needs. Twist the dial on the left side of the machine to fine tune to get it exactly on the line that you need. With that all set, run a test paper. Slide it into the throat of the machine, all the way to the left, press down on the Palm switch or the foot pedal. A handy test at this point is to fold the paper in half, line up the corners, and see if the holes all line up. It should be centered with no half or missed holes. The solution to half holes is to remove a pin. All the pins are disengageable on the Rhin-O-Tuff die. Pull the die out, find out which pin it is that you need to remove, open the carriage, remove the pin, replace the carriage, and you're all set. Pin removal is the same for all Rhin-O-Tuff dies. It's very simple, it's very quick. Lock your die back into place and let's punch again and we'll see how we're doing. This one looks perfect. Do the fold test again and everything looks great. It's time to begin.
With your project all in order in the way you'd like it to be, process through your whole project, pack by pack of up to 55 sheets in a single punch. All Rhin-O-Tuff punches come with the patented auto-reverse feature, keeping paper jams a thing of the past. However, it can happen if just too many sheets are put in at the same time. Stored on the back side of the machine is a small handle. This goes in on the left-hand side of the machine right into the groove; turning it counter clockwise will reverse the pins on the machine, then you can remove your paper. If you need to, you can peer down just to the left side of the paper stop and you can actually watch the pins retract to make sure they are all gone so you can remove your paper. The chip tray in the front is transparent so you can keep an eye on just how many chips are building up.
That's the demonstration and how-to. And now for the assembly. Once you've removed your machine from the box, place it on a sturdy table and remove the plastic coating that protects the transparent cover of the chip tray. Inside the chip tray, you'll find all the parts of assembly that you'll need. There's oil for lubrication, two handles to lock and unlock the die, a power cord, a Palm switch, as well as the foot pedal.
The first step is to install the two handles. Remove from the bag and place them on either side. Screw them tight all the way down. These will service the lock and unlocking of the punched dies. The Onyx HD7700 comes with a foot pedal that plugs into the back of the machine and activates the punch. Also included with this machine is the Palm switch; some prefer it to the foot pedal. It plugs into the same place on the back of the machine and is activated either by finger or by palm. If you have purchased the optional Versa switch, now would be a good time to install it. Simply remove the knob from the paper stop and take the stop itself off. Then replace it with the Versa switch and screw the same knob back down. This switch plugs into the back of the machine in the same spot for the foot pedal or the Palm switch.
For the Onyx HD7700, the dies go in on the right-hand side. Place them in, slide it all the way until the black part is flush with the machine. And then lock both handles on the right and left. There you go, you're all set. That's the demo and assembly of the Onyx HD7700. You're on your way to a great many books. For more demos, reviews, and how-tos, check out MyBinding.com.
One of the greatest features of all Rhin-O-Tuff Onyx punches is the interchangeable die system. Rhin-O-Tuff has created more ... Read More
Welcome to MyBinding video. Let's take a look at the features and uniqueness of the Onyx HD7700. This is the top of the line single-punch solution for all your binding needs. Heavy duty and comes with an industry-leading three-year warranty. It's all shipped together with one box and with the Onyx HD7700, you get the Palm switch as well as a foot pedal. Some users prefer the hands-free of the foot pedal and some would rather use the hand they're holding the paper with.
One of the greatest features of all Rhin-O-Tuff Onyx punches is the interchangeable die system. Rhin-O-Tuff has created more than 20 interchangeable dies that fit in this machine alone. And they slide in and out just like you so. So whatever bind, punch pattern, or look you're going for for your business, this can be one machine that handles all of your needs. Each die is priced separately, and there are dies for plastic comb, wire loop, plastic coil, VeloBind, and three-hole loose leaf. It's an impressive looking machine and the chip tray in the front is transparent so you can see right in to see how things are filling up. The punch capacity is rated up to 55 sheets or 110 pages of 20lb paper. You can also punch up to five plastic mylar sheets, regardless of the whole pack. And as with all Rhin-O-Tuff Onyx punches, the unique auto-reverse feature is in play.
As you work, a new overload detection feature triggers an auto-reversing function to reduce jamming in the punch. Perfect and consistent punching is what you need for your business. With this machine's paper stop system, it dials in exactly what you need according to the size paper you're using and with this dial, you can even fine tune your settings so you can set it, forget it, and run your whole project without fear. If you want confidence in excellent punching, the Rhin-O-Tuff Onyx HD7700 is a great bet.
For more demos, reviews, and how-tos, check out MyBinding.com.
Welcome to MyBinding video. In this how-to video, we'll learn just how to change a die on an Onyx HD7700 punch. It's as simple as that. First off, the turn the power off in the back. From both sides, unlock the die by simply bringing down these two levers and remove the die by sliding it directly out until it's completely out of the carriage. Make your selection from the many interchangeable dies that Rhin-O-Tuff has created for this system and others, and with the pins facing away from you, slide it back into the machine just the way you took the other one out. Slide it all the way to the black part as flush with the side of the machine and lock it up both sides. And that's easy die-changing on the Onyx HD7700. For more demos, reviews and how-tos, check out MyBinding.com.
Rhin-O-Tuff HD7700 Ultima Binding Punch Review
Are you looking for a high-quality binding punch that can utilize interchangeable die sets? If so, you’ll want to check out the Rhin-O-Tuff HD7700 Ultima. Here’s a rundown of its strengths and weaknesses.
- The HD7700 Ultima’s primary strengths are its phenomenal punching capacities. It’s possible to punch anywhere from 40 to 55 sheets of 20 lb. bond paper per lift. These are some of the highest punching capacities you could ever hope to find. The punching capacity may vary a bit depending on which die set you use. For example, when using the three-hole set, you can do 55 sheets at once while the coil set will probably be able to punch 40 sheets. You’ll just have to try it for yourself to see which die sheets can punch the most.
- This machine has a vertical punching mechanism. Vertical punching makes it more likely that your pages will be punched perfectly so you won’t waste time and paper.
- As alluded to before, the HD7700 Ultima has interchangeable die sets that can be used to punch different hole patterns for various types of binding. The sets available can be used for plastic comb, color coil, wire, and other types of binding. (There’s even a three-hole set.) Each machine comes with one die set of your choice. The die sets are easy to exchange and can be pretty much slid in and out of the device. No extra tools are needed so that makes the process even easier.
- This machine has a 14-inch punching throat. It’s large enough for legal-sized paper (8.5 x 14”) and other sizes of documents. Throats of this size aren’t particularly common, so it’s a great feature to have. The dies in each set can be disengaged so you can punch the right number of holes depending on the size of your document.
- The HD7700 Ultima’s chip tray can hold up to 150% more than typical trays. It even has a window so you can see when it’s getting full. And there are also diagnostic lights to keep you abreast of the machine’s functions. Finally, there’s a reverse mode just in cast the paper gets jammed and a foot pedal you can use if you want to keep your hands free.
- This device has a one-year warranty and features extremely durable construction. All of the parts are made out of metal, so you may find that you don’t need the warranty at all even if you use the machine frequently.
- While the HD7700 Ultima would be great for binderies and industrial environments, its intimidating appearance might not be appropriate for some office settings.
- This is a very large device that measures 8.5” (height) x 21” (width) x 22.5” (length). It’s also heavy, tipping the scales at 103 pounds. So you’ll want to make sure there’s enough room in your work area for it.
- If you want to work with more than one binding method, you’ll need to purchase additional die sets.
The Rhin-O-Tuff HD7700 Ultima has a lot more strengths than weaknesses and is really one of the best die punches on the market. It’s great that it can produce so many different hole patterns and that the die sets are easy to change out. (However, keep in mind they’re are sold separately.) The punching capacities are terrific and you’ll be able to work with different sizes of documents. So long as the device’s appearance and size aren’t a big deal, you should check out the HD7700 Ultima today.